Shipping Policy : 1.WE ship the products by DHL ,Fedex ,UPS or other express etc.

Applications

CM-8000 Wet Film Comb Used for checking the thickness coating of wet paint, enamel lacquer,adhensive , architectural coating, color coating, varnish, chemical industry,or other coating that has been applied to a smooth surface.

Measuring Procedure :

Applications:
CM-8000 Wet Film Comb Used for checking the thickness coating of wet paint, enamel lacquer,adhensive , architectural coating, color coating, varnish, chemical industry,or other coating that has been applied to a smooth surface.

Measuring Procedure :
1. Select appropriate comb according to approximate known thickness.
2. Hold comb perpendicular to surface coating to be measured.
3. Press into coating until the comb stands square on substrate.
4. Wet film thickness is between the highest step which is coated and the next (higher) step which remains uncoated.

• Select appropriate comb according to approximate known thickness.
• Hold comb perpendicular to surface coating to be measured.
• Press into coating until the comb stands square on substrate.

Powder Coating Shops
Forging and valve manufacturer
Paint Shops and Applicators
Coating Inspection Engineers
Painting Contractors Inspection
Anodizing Contractors
Motor Vehicle Manufacturers
Automotive Refinishers, Insurance agents & more...

DFT Gauge (Ready to Use), 2 x Calibration Checkpieces (Aluminium and Steel) & 5 x Thickness Check FoilsVehicle Appraisers & Buyers, Panel Beaters / Motor Body Repairers, Painting Contractors, Galvanizers,Anodisers, Powder Coaters, Metal Fabricators,Chromers, Motor Vehicle Manufacturers, Vehicle Detailers, Zinc Platers etcTechnology - Magnetic Induction - (enables measurement of non magnetic coatings on magnetic substrates such as Steel, Mild Steel, Cast Iron &Magnetic Stainless Steel). Example coatings:- Paint,Zinc / Galvanising, Chrome, Copper, Enamel, Rubber, Paint, Varnish, Powder Coating, Plastic etc.Technology - Eddy Current - (enables measurement of non-conductive coatings on non-ferrous substrates such as Aluminium, Copper, Brass, Zinc, Tin, and Non- Magnetic Stainless Steel). Example coatings:- Paint,Enamel, Rubber, Paint, Varnish, Powder Coating,Anodizing, Plastic etc.Measuring Range 0-1500μm (0-1.5mm) or 0-60milResolution 0.1μm (0-99.9 μm) and 1μm (over 100 μm)Accuracy ±1+3% H (H:coating thickness)

Multi- Purpose Gauge or Master Paint Plate a very useful gauge forcross cut adhesion testing as per ASTM D3359 Method A and ASTM D3359 method Bstandard. This gauge is also useful for determination of wet film thickness and also used to determine sagging properties. ASTM D3359 Test Method A is primarily intended for use atjob sites while Test Method B is more suitable for use in the laboratory. Also, Test Method Bis not considered suitable for films thicker than 5 mils (125μm)